How To Reset The Tire Pressure Light? A Step-By-Step Guide!

Written By: Terrence Hines
Category: Tire

“How to reset the Tire Pressure Light?” is a common question many drivers have. If your Tire Pressure Light is illuminated, addressing the issue as soon as possible is important.

Fortunately, resetting the light may be an easy fix—in some cases, you only need to increase or decrease tire pressure to get rid of the warning light. So here is a proper guide for you today!

How To Reset The Tire Pressure Light?

If your Tire Pressure Light (TPMS) is illuminated on your vehicle’s dashboard, one or more tires are under-inflated.

The TPMS system monitors tire pressure and alerts you when a pressure drops occur. Here is a step-by-step guide to resetting the Tire Pressure Light:

How To Reset The Tire Pressure Light?

– Fill your tires with the recommended tire pressure to reset the light. This can be found in your car’s owner’s manual or the placard inside the driver-side door frame.

– Then, turn on your vehicle and let it sit for a few minutes so that the Tire Pressure Monitoring System (TPMS) can calibrate itself.

– To locate your TPMS reset button, search the area around your vehicle’s battery and fuse box under the hood. It should be within easy reach of these two components.

– Depending on your vehicle, you may have either a button or switch labeled “TPMS” (Tire Pressure Monitoring System) or “Tire Pressure Reset”.

– To reset successfully, press and hold this button for 3-5 seconds until you hear a distinct click. This will signify that the process has been completed.

– After that, start up your vehicle and check to make sure that the Tire Pressure Light is no longer lit up on the dashboard. This will indicate that it has been successfully reset.

– Once completed, check all tires to ensure they are at their optimal pressure level. If a tire is still low, add air and press the reset button again.

– Drive your vehicle for at least 15 minutes at speeds greater than 20 mph (32 km/h) to ensure the system has enough time to calibrate itself properly with the new tire pressure levels.

– Later on, check all four tires again to ensure they are all properly inflated and that the TPMS light is no longer illuminated on your dashboard.

These simple steps allow you to reset your Tire Pressure Light and avoid costly repairs easily. So, your Tire Pressure Light should now be reset, and your car will be ready for safe driving!

Why Should You Reset The Tire Pressure Light?

The Tire Pressure Light is an incredibly helpful indicator for drivers, as it lets you know when your tire pressure is not optimal.

Why should you reset the warning light? Not only does it help keep your drive more efficient, but lower tire pressure can also affect overall handling and performance.

Why Should You Reset The Tire Pressure Light?

Keeping up with regular tire maintenance redirects fuel expenses by limiting fuel consumption due to air loss.

In addition to that, regular checkups on the tire pressure ensure safety during your drive since having low tires can cause problems in various terrains and situations.

Resetting this light reminds you to check your car out in real-time, as safety should be taken seriously.

Therefore, the next time this alert light pops up, be sure to take a few moments and get that reset.

What To Do If The Light Doesn’t Go Off After Resetting It?

Resetting the Tire Pressure Light might seem daunting, but it’s pretty straightforward.

If the light remains on after resetting it, the first action should be to check the tire pressures; if they are not at the suggested psi, fill accordingly and then try to reset them again.

If this doesn’t work, take your vehicle to a mechanic for professional help; more than likely, something must be replaced for the Tire Pressure Light to go off.

While how to reset the tire pressure light can vary from car model and year, chances are you have similar steps in your owner’s manual that explain how – looking it up is always an option.

Additionally, there could be specific fault codes that need addressing too; if so, these would need to be diagnosed by a professional too.

What To Do If The Light Comes Back On After Resetting It?

After resetting the Tire Pressure Light, it is important to check on the tire pressure levels if the light comes back on.

Before you begin, take the time to assess each wheel and ensure that they are adequately inflated. Additionally, turning off your car for a few minutes before restarting it is wise.

How To Reset The Tire Pressure Light

Doing so will help ensure everything functions properly while also protecting the engine from any potential damage caused by low tire pressure levels.

This process can often reset any faulty sensors or warning lights that may be sending false signals.

If this does not work, it may be time to consider more serious measures, such as taking your vehicle to a certified service center.

There, a trained professional will know how to reset the Tire Pressure Light and how best to remedy any further issues you may encounter.

Causes Of Tire Pressure Light

The Tire Pressure Light is a useful indicator for drivers, alerting them when their tires are underinflated. There could be several causes of this – including the temperate dropping!

With just one look at the dashboard, you’ll know if your car needs a little love and attention.

As temperatures drop, the pressure inside a tire can also drop; if you notice the light come on in winter, you simply need to add some air to your tires to get them back to normal.

Another common cause of your Tire Pressure Light coming on is a puncture in one or more of your tires.

If this is the case, you’ll need to do more than just add air—you’ll want to take it into a repair shop to get the tire patched up.

If resetting the Tire Pressure Light is necessary after any of these issues, you can usually do this by pressing and holding the button for ten seconds until the light goes off.

How Often Should You Check Your Tire Pressure?

Many drivers don’t realize how important it is to check the pressure in their tires regularly.

Not only does this contribute to improved fuel efficiency and longer tire life, but it will also reduce the risks of a potential accident on the road due to low tire pressure.

Uncovering how regularly to inspect your tire pressure is easy – check the inside door jamb or glove box. Generally, most cars need between 30-35 PSI of air per wheel.

By looking at these materials, you will know precisely what tension level is required for optimal performance and safety.

It’s important to note that as temperatures drop during winter, so does your tire pressure – so pay extra close attention during colder weather or after a cold night’s rest.

How Often Should You Check Your Tire Pressure?

To reset the Tire Pressure Light, ensure each wheel has the right air.

Start your car without driving it. This will give the system time to recognize that the air is at the right level and reset itself.

Knowing how frequently you should check your tire pressure and how to reset the tire pressure light are essential in ensuring you are safe when driving on roads with other motorists.

Some Ways To Check Your Tire Pressure

Often, trying to check your tire pressure can be inconvenient or difficult. To make it easier, there are other ways that you can keep an eye on how the pressure is doing in your tires.

It might come as a surprise, but the majority of cars feature an individual Tire Pressure Light on their dashboards.

If you want to reset this light after filling your tires with air, it’s easy – just follow the simple steps in your owner’s manual!

If this light turns on, then it usually means that one (or more) of your tires needs air and should be checked as soon as possible.

You can quickly locate the joystick-shaped switch on either the driver’s side door or under your car’s hood – and you’ll be ready to go.

If you push it, it will make a sound to tell you when you need to check your tire pressure.

This way, you cannot only stay secure while on the road but also ensure that all of your tires are properly inflated at all times.

So next time you need to check how much air is inside your tires, don’t forget about how useful these tips can be!


Knowing how to reset the tire pressure light is a great way to ensure your vehicle runs safely and efficiently. Fortunately, it’s a really easy process!

All you have to do is check your vehicle’s tire pressure according to your manual or the manufacturer’s specifications, refill them with air as needed, and restart your car.

There’s no need for special tools or fancy gadgets – third-party apps or professional help won’t be necessary here either.

As long as you know how much air each of your tires should have, you can quickly and easily reset the Tire Pressure Light.

Terrence Hines

Leave a Comment